KegLand Oxebar Mono PET Keg | Plastic Reusable Bottle | Cary Handle & Reusable Screw Cap Included | 2.1 Gallons | 8L

• Oxebar Mono is a lightweight 2-gallon keg with high oxygen barrier properties compared to standard PET plastic
• Add the Ball Lock Adapter Tapping Head to easily pressurize and dispense at home or on the go
• Lighter than traditional glass growlers. Easier and safer to transport
• Made from Nylon impregnated PET for superior oxygen barrier
• Wedge seals on the optional Tapping Head and Ball Lock Caps eliminate points of oxygen ingress found where rubber is traditionally used
• Lower total oxygen pickup compared to a standard corny keg lid seal

This 2-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

This product is sold with the PCO38 cap, however if you would like to dispense this product through a draft system, we recommend the use of the Ball Lock Adapter Tapping Head. The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure relief valve to the top of the keg.

What is Oxebar Mono
Oxebar Mono is a PET polymer blend that utilizes several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic, Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by 3x. We recommend this product for beer storage of up to 6 months.

Dimensions:

• Diameter: 6.1" (155 mm)
• Height: 20.5" (520 mm)
• Pressure Rating: 58 psi (4 BAR)
• Temperature Rating: 113°F (45°C)

KegLand Part Number: KL22347

NOTE: Oxebar kegs are marked with a manufacturer’s “expiry date”. This does not indicate that the keg is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the keg be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the KG520 Tapping Head and D1072 Green PRV to perform the test. If you do not plan to pressurize the keg, the test is not necessary.